How to better use the row welding machine? According to the editor of the welding machine manufacturer, when the data is set to the next setting after the state is completed again, the number of wefts is the number of meshes, and the automatic start time of the machine is free. It is necessary to adjust the automatic start of the machine Time, the mobile gear network platform automatically returns to the waiting time. The welding machine is composed of electromagnet, metal block, sunshade, air pump, high pressure nozzle, fume hood, high pressure fan, vacuum filter, filter, HEPA filter element, and the electromagnet is installed at the bottom of the device slot.
The platoon welding machine adopts synchronous control technology. The welding time and time control time are composed of a digital programming system. The equipment has the characteristics of one-time stamping, secondary welding and strong solder joints. When the platoon welding machine is welding, the punching mechanism enters according to the program request Welding stage.
The single-chip integrated control system is selected as the welding controller of the row welding machine. The control parameters of each group can be adjusted arbitrarily through the imported digital keys. There are two groups of control parameters, dual current and two foot switches, which can complete welding of different specifications. On the same network, there are holes of different sizes between the weft and the weft, and the row welding machine control has the functions of pre-compression, continuous current regulation and network voltage fluctuation compensation.
