Reinforced mesh welded mesh machines are mainly used for concrete pouring of bridges, water conservancy, highways, national key projects, etc. The welded mesh has a width of up to 2.5 meters, a length of up to 12 meters, and a welding diameter of 6mm~12mm. What matters should be paid attention to when maintaining the steel mesh welded wire mesh machine.
The operator of the row welding machine is not allowed to put his hands or objects close to the upper electrode that is moving under pressure or put it between the upper and lower electrodes. Sprockets, belts, chains, straighteners, inductors, proximity switches, electrical cabinets, transformers and other conductor parts with risky voltage.
Operators of platoon welding machine must not dismantle or break the zero (grounding) safety maintenance line on the host and electric control cabinet. Regularly check whether the zero (grounding) safety maintenance line is good. Operators of platoon welding machine must not plug or touch with power. Remove the power conditioning plug on the welded mesh power transformer, and do not lift the protective plate.
Operators of the platoon welding machine are not allowed to adjust the equipment in the electric control cabinet at will, and they are not allowed to put tools, iron wires and other sundries into the electric control cabinet or put them on the top of the cabinet or on the rack at will. When there is a fuse in the platoon welding electric control cabinet , The power should be shut down first, and the electrician should find out the cause of the fuse, and then communicate with the fuse core of the same model and specification, otherwise it will cause a fire and burn the equipment.
